Google+

CVSA’s 2016 Brake Safety Week is September 11-17

Leave a comment

September 9, 2016 by Minuteman Trucks

 

Brake Safety Week

Brake Safety Week is an annual week-long brake safety campaign when CMV inspectors conduct brake system inspections on large trucks and buses throughout North America to identify out-of-adjustment brakes and brake-system violations. The week is an annual outreach and enforcement campaign designed to improve commercial vehicle brake safety throughout North America.

Properly functioning brake systems are crucial to safe CMV operation. CMV brakes are designed to hold up under tough conditions, but they must be routinely inspected and maintained carefully and consistently so they operate and perform properly throughout the vehicle’s life. Improperly installed or poorly maintained brake systems can reduce braking efficiency and increase the stopping distance of trucks and buses, posing serious risks to driver and public safety. ABS systems help the vehicle, and thus the driver, maintain control in certain situations, which reduces the risk of some types of crashes.

Brake-related violations comprised the largest percentage (representing 43 percent) of all out-of-service violations cited during Operation Airbrake’s companion International Roadcheck campaign in 2015, which focused on inspections of both vehicles and drivers.

Inspections conducted during Brake Safety Week include inspection of brake-system components to identify loose or missing parts, air or hydraulic fluid leaks, worn linings, pads, drums or rotors, and other faulty brake-system components. ABS malfunction indicator lamps are also checked. Inspectors will inspect brake components and measure pushrod stroke where applicable. Defective or out-of-adjustment brakes will result in the vehicle being placed out of service.

Many inspectors will be conducting Level I Inspections, and in the 10 jurisdictions currently using performance-based brake testing (PBBT) equipment, vehicle braking efficiency will be measured. These systems include a slow speed roller dynamometer that measures total vehicle weight and total brake force from which braking efficiency is determined. The minimum braking efficiency for trucks is 43.5 percent, required by U.S. federal regulation and the CVSA out-of-service criteria.

Outreach and educational efforts by CMV inspectors, participating motor carriers and others in the industry will also take place during Brake Safety Week and are integral to the success of the campaign.

More than 3.4 million brakes have been inspected since the program’s inception in 1998.

This safety bulletin is brought to you by Idealease.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: